Standard Features :
Self-Canceling Turn Signals
8-Position Tilt
4-Way Flashers
Knobs and Handles
Ford Turn Signal Switch
Ford Top Shaft
Floor Mount included
3/4" 36 Lower Shaft
Available Finishes: Paintable Steel, Chrome Plated Steel, Black Powder Coat
Steering Wheel Bolt Patterns Available: Ford Top Spline
Note: A stock Ford wheel will bolt on the top this column.
Installation Kit
Part numbers
Installation Instructions
Mustang Flyer

1965-66 Mustang Paintable Steel
Tilt Floor Shift - 1120642010

Part numbers

Note: A stock Ford wheel will bolt to the top of this column.

ididit introduces the first Ford Top Shaft and Ford Turn Signal Switch steering column for the 1965-66 Mustangs!  This made to fit column will include a special new floor mount, Mustang style knobs & handles and male & female plugs with terminals.  ididit's new Mustang column will accept a stock Mustang steering wheel or an aftermarket wheel with an adaptor.  By using the stock underdash mount and a coupler, the installation is a breeze!  The new 8-position tilt 1965-66 Mustang column is available in Paintable Steel, Chrome and Black Powder Coated.  As always, all ididit  columns are American Made!

Part numbers...

Note:
A stock Ford wheel will bolt on the top of this steering column.

1965-66: Your original column has a solid shaft from inside the gearbox to the steering wheel. This shaft will need to be modified. A new coupler will need to be put in place between the modified shaft and the column.

The 1965-66's Installation Kit for a Stock Box will Include:
3x4"DDx3/4"36 Coupler Only (PN: 3000313449)

The 1965-66's Installation Kit for a Rack & Pinion will include:
3/4"DDx3/4"36 U-Joint, 18"DD Shaft.

Manual Rack will need a U-Joint (3/4DDx?) and a Power Rack will need a Vibration Joint (3/4"DDx?). When attaching to your Rack & Pinion system you will need to know the manufactures specs on the output shaft. Once you know what type of U-Joint or Vibration Joint you will need to connect your new column you can then connect to your Rack & Pinion system.

(Installation Kits are sold separately)

1965-66 Mustang Paintable Steel Tilt Floor Shift Installation

1965-66 Mustang Black Powder Coated
Tilt Floor Shift - 1120642051

Part numbers

Modified Shaft: The shaft will need to be cut and modified as shown above.